SmallRig Articulating Arm with Dual Ball Heads (1/4”-20 Screw) 2070
1. 1/4"-20 mounting screw at each end.
2. 360-degree full-range adjustment.
3. Secure two ball heads with a single thumb lever.
4. Interchangeable with other SmallRig ball head options.
5. Load capacity: 5 kg/11 lb.
SmallRig Articulating Arm with Dual Ball Heads (1/4”-20 screw) 2070 can be used to mount an accessory on your camera rig firmly and flexibly. Both ends of the arm feature a 1/4"-20 screw and a tightening thumbwheel for easy accessory mounting, with rubber pads protecting the equipment from scuffing. Use the included small hex key to further tighten the thumbwheel if the heavy device is attached. Both ball heads are secured using the single, large thumb lever. Compatible with a wide range of devices such as field monitor, LED light, sound gear, etc., this arm has a load capacity of up to 5 kg/11 lb. It is interchangeable with other SmallRig ball head parts such as 2132, 2133, 2134, 2211, 2114, 2108 and BUM2383 for differenct mounting configurations.
Designer: Yetta White
1 x Articulating Arm
1 x Hex Spanner
Product Dimensions: 137 x 28 x 57.5mm
Package Dimensions: 155 x 40 x 80mm
Net Weight: 152g
Package Weight: 190g
Material(s): Aluminum Alloy, Stainless Steel
*Please note the import tax may occur.
usual high build quality and well thought out design from SmallRig. Can easily handle larger monitors like Shogun, BM 4K etc. Integral screw design means you don't have the physically twist the kit you're mounting - instead you just hold in place and tighten. The large surface area of the central thumb tensioner provides good, even pressure to the locking mechanism. A nice alternative to traditional articulating arm.