Designer: Yetta White
SmallRig Cage for Fujifilm X-T2 and X-T3 Camera with Battery Grip 2229
1. Form-Fitted aluminum cage for Fujifilm X-T2 and X-T3 camera with battery grip.
2. Features a M2 threaded hole on the right side as a second lock point to prevent wiggling.
3. Nato rail on each side allows to quick release accessory.
4. Multiple 1/4"-20 & 3/8"-16 & Arri 3/8”threaded holes for accessory attachment.
5. Features a cold shoe on the top for microphone mount.
6. Optional rod clamp 1943 can be attached to the front to ensure 85mm from the rod center to lens center.
SmallRig Cage for Fujifilm X-T2 and X-T3 Camera with Battery Grip 2229 is a form-fitted cage which is designed to provide all-around protection and mounting options for the camera. The cage is fixed on the camera via the bottom 1/4"-20 threaded hole and the m2 threaded hole as a second point to prevent wiggling. The one-piece aluminum cage features multiple 1/4”-20, 3/8”-16 and arri 3/8” holes for accessory attachment. Additionally, it features a cold shoe on the top for microphone mount and nato rail on both sides allows for quick release of your setup, such as Magic Arm 2071. The bottom features rows of 1/4"-20 & 3/8"-16 threaded holes allows for mounting different types of tripod plate. Optional Cable Clamp 2156 camera can be attached to the left side to ensure the signal stable, and Rod Clamp 1943 can be attached to the front to ensure 85mm from rod center to lens center.
1 x Cage
1 x M2 Screw
1 x Hex Spanner
Product Dimensions: 158 X 59X 153mm
Package Dimensions: 180X180X80mm
Net Weight: 255g
Package Weight: 340g
Material(s): Aluminum Alloy
I've used this numerous times for my XT3 with battery grip when shooting video with a monitor. There's plenty of mounting points for your accessories and it's very lightweight considering it's strength and protection. As mentioned in another review the only negative is that it's pretty hard to move the drive dial once it's in video mode. If you're the type to walk around with a pencil behind your ear you'll have no problem. :)
This cage is of a very high standard it is perfectly moulded to the profile of the camera with numerous mounting points, the only negative I can find is it is difficult to change the drive setting back from Video too stills as there is very little room for you to get your finger in between the cage and dial but otherwise it is an excellent cage and well worth the purchase as it allows for the easy attachement of all your necessary accessories when filming. I have a quick unboxing and overview video here on Youtube https://www.youtube.com/watch?v=5AoTM44kwdA&t=33s