Designer: Miky Xie
SmallRig 25mm Rod Support Feet for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring 1914
SmallRig 25mm Rod Support Feet 1914 is exclusively designed for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring. 25mm rod clamp locks Ronin M/MX Grip/MOVI Ring so that it can stand on the ground firmly. Cold shoe attaches magic arm and then attach monitor so that the cameraman could check the screen during handheld shooting. 1/4’’ threaded holes could attach magic arms and then monitor. 1/4’’ and 3/8’’ threaded holes could attach a quick release plate and sit on a tripod. The rubber cushions at the bottom are anti-sliding, making Ronin M & Ronin MX Grip / Freefly MoVI Ring stand on the ground firm. Wingnuts or screws could be applied to lock as per your needs. Support feet could be folded along with the Ronin grip and put into the bag.
1. 25mm rod clamp locks Ronin M/MX Grip/MOVI Ring.
2. Cold shoe attaches magic arm and then attach the monitor.
3. Pads at the bottom are anti-sliding.
4. Wingnuts or screws applied to lock as per your needs.
Note: The payload of the support feet is 5kg, if you intend to use a camera such as Sony FS5 or Canon C200 on your gimbal stabilizer, please use the Allen Wrench instead of Wingnuts to tighten the feet.
DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring
2 x Support Foot
4 x M5 Screw
1 x Hex Spanner
Product Dimensions: 147x 46x 28mm
Net Weight: 253g
Package Dimensions: 200 x 140 x40mm
Material(s): Aluminum Alloy
*Please note the import tax may occur
Having this rig with these feet is absolutely required. Will make your work so much easier.
does what it should, easy enough to install and remove quickly. but just leave it installed.
It helps to balance the MoVI Ring, so that the MoVI Ring could stand on the ground firm. This is very important for me and that is the reason why I bought it. It also comes with cold shoes and threaded holes for external accessories. Terrific!
Order 2 sets of them for my ronin Grip, Affordable and very useful products. No need for the bulky stand any more.
Ordered these after ordering a DJI Ronin M Grip. Very high quality product that will last for years. They have a nice rubber strip on the bottom to stop them sliding on surfaces. Also with the thread mount holes in the bottom you can put it on a tripod which I haven't tried yet.
If you buy a DJI Ronin M Grip these are a must buy, the Grip is great but you can't put it down without leaning it against something. So now with the feet installed if you get tired you can put it down on the ground without the worry of it falling over :)
I would personally recommend this product to anyone thinking of getting the Ronin M Grip. I use it daily in video production and it gives me a welcome break during filming and also allows me to change camera settings more easily. And one last thing you can now just take your grip, Ronin M and camera on a shoot and leave your tuning stand at home :)
These feet are a great addition to any gimbal operators. I operate a DJI Ronin-M w/ the DJI loop. So this matches well with the tube it's made with.
With the fear of it sliding loose I added gaffer tape to where it would be mounted. That moment if it were to get loose that it wouldn't slide. I'm very conscious of checking it every new day that we are in production, so the option of having the hand tight thumb screws is a great addition. Because I don't want to over torque the screw and ruin the loop by using the other screw provided.
I really like the cold show mount and screw (on the short end of the feet). Gives you that option to run any accessory if needed. I personal use an extension with an articulated arm holding on to an off camera monitor.
Only gripe about this item, is not the product itself but the customer service behind this. I understand that it is a China co. with China delivery time but that wasn't my issue. I was promised one thing but got the complete opposite on promised date of delivery.
Absolutely nothing wrong with the product, 5 star product all the way but 2 star for customer service. I recommend to all, if you are patient about it.
Love this product. Has changed my shooting style and workflow. Made my life so much easier. All of SmallRig's products are extremely well engineered and designed. Very impressed!
These feet are the perfect companion for your DJI Grip or alike. I've been using them on my DJI Ronin M + Grip setup and my overall experience has been excellent.
They do exactly what they need to do, keep your Ronin setup upright. They provide you a solid foothold and provide good stability for their size, a nice balance between these two factors. I find that inclining the set up slightly forward, towards the front of the feet works best for the best stability. At first I was hesitant whether the feet would be big enough to keep the setup stable, but they have proven to be solid. As long as you'er not a total clown and leave the setup in the middle of a children's playground for instance, you can rest assured that these puppies will keep your setup upright. I guess your mileage may vary depending on the size and weight of your setup. It works great for my Ronin M + DJI Grip + GH4/A7S + Apature VS-2 Fine HD 7" monitor.
The materials used for these feet feel very solid and sturdy, including a so far (had them for about 2 weeks now, used them about a dozen times) durable paint finish. The feet provide multiple 1/4" threads and 1 3/8" thread, allowing you to mount accessories or to mount the base of the feet to a tripod baseplate. Very convienent. The 2 levers on top of each foot, allowing you to easily adjust the angle of the feet relative to your set up, are of solid bios quality also. Allowing you to readjust their positioning in a jiffy. I leave mine permanently attached to my DJI Grip, as they fit in the Grip's bag while attached. The feet also come with some rubber patches on the bottom of them, providing extra grip on slippery surfaces.
All in all, I think these bad boys are a must if you're using a Ronin setup similar to mine, especially at this price point.
5 out of 5 would buy again.