logo.png
Search smallrig.com...

Sigma FP2 Launch Recap: Hands-On with a Compact Full-Frame, and Our New FP2 Accessories

SmallRig 2026-11-02 19:33:13
Contents

On October 23, SmallRig joined Sigma at its headquarters in Kawasaki, Japan, for the official launch of the Sigma FP2. The event marked the arrival of a camera that carries the fp series concept forward while addressing nearly every limitation of the original — and it also marked the debut of two SmallRig accessories designed specifically for the new body, both now available for pre-order.

Sigma FP2 launch brochure: Small, Powerful, Adaptable

Camera Sigma FP2 (on sale November 11, 2026)
SmallRig Accessories Cage for Sigma FP2 (ID 6505) · L-Shaped Mount Plate with Wooden Handle (ID 6506)
Availability Now open for pre-order on smallrig.com

Key Features

  • 24.5MP partial-stacked full-frame sensor with fast readout and reduced rolling shutter
  • Hybrid AF: 1,215 PDAF points + 345 contrast points, now with bird detection
  • 6K OpenGate video, 14.1 stops dynamic range, ProRes RAW and L-Log
  • SmallRig Cage (6505): wooden grip, HawkLock NATO, Arca-Swiss base, HDMI clamp
  • SmallRig L-Plate (6506): wooden handle, Arca-Swiss bottom, magnetic built-in wrench

The Sigma FP2: Small, Powerful, Adaptable

Sigma's presentation drove home three words: Small, Powerful, Adaptable. For the first time since the original fp launched in 2019, the hardware genuinely delivers on all three.

Sigma FP2 camera body on display

Sensor and autofocus, finally brought up to date

At the core is a 24.5-megapixel partial-stacked full-frame CMOS sensor (35.9 × 23.9 mm). The stacked design delivers dramatically faster readout, which cuts rolling-shutter distortion — a side-by-side comparison at the event, shot at 1/8000 s of a passing Shinkansen, showed visibly straighter verticals than the original fp.

Focusing has been completely reworked: 1,215 phase-detection points paired with 345 contrast points, versus the original fp's 49 contrast points. Sigma quotes AF-speed gains of roughly 35% in bright light and 80% in low light, and subject detection now covers eyes/faces, dogs, cats, and — new for the series — birds. Continuous shooting tops out at 20 fps with a 200-frame buffer.

Ergonomics and video, finally caught up

FP users' long-standing requests are addressed: a tilt screen (90° up / 45° down), 13 color modes on a dedicated button, battery life improved by ~30% (~370 stills / 130 min video), and 70 GB of internal storage alongside the UHS-II SD slot. The body stays pocket-sized at 112.8 × 69.9 × 41.8 mm and roughly 376 g.

Video remains the series' calling card: 6K OpenGate recording, up to 14.1 stops of dynamic range (4K FF L-Log), ProRes RAW and L-Log support, 32-bit float audio, and an updated Director's Viewfinder that simulates ARRI ALEXA 35 and Sony VENICE 2 / BURANO. A physical top switch toggles instantly between STILL and CINE modes.

Disassembled Sigma FP2 showing internal engineering

Top-down view of FP2 internal components

Sigma also previewed the 50mm F1.4 CL DG | Contemporary lens (expected spring 2027) — a new CL line that deliberately retains aberrations for a softer, film-like rendering, in silver and black.

Sigma 50mm F1.4 CL DG in silver and black

Hands-On Impressions

The defining impression after time with the camera is how much more approachable the FP2 is than its predecessor. AF — historically the fp series' weak point — now feels genuinely usable, quick to lock and confident tracking, which removes the biggest practical barrier to daily carry. The tilt screen is a real quality-of-life upgrade for low-angle and overhead work, and the 13 color modes are immediately fun to cycle through.

The body is familiar in size — essentially the same footprint as the original fp — but the engineering story is more impressive in person. Seeing the sensor module, internal frame, and alloy structure laid out on the Sigma display made clear how much has been refined inside an unchanged silhouette.

Built to Be Expanded: Where SmallRig Comes In

The "Adaptable" pillar is where the FP2's design philosophy becomes concrete. The body features standardized 1/4-inch screw holes on both sides and the base — an open invitation to build the camera into a full rig. That is precisely the gap our two new accessories are designed to fill.

Cage for Sigma FP2 (ID 6505)

FP2 built out as a full video rig

  • Three-point locking. Bottom screw, locating pin, and side screw for zero-twist stability; precision cutouts keep all buttons, ports, and the original EVF fully accessible.
  • Integrated wooden grip. Comfortable, secure hold during extended handheld shooting.
  • HawkLock ecosystem. NATO rail, 1/4"-20 threads, and ARRI locating holes for magic arms, monitors, and top handles.
  • Removable modular cold shoe. Maintains full compatibility with Sigma's original electronic viewfinder.
  • Built-in Arca-Swiss base. Mounts directly on Arca tripods and DJI RS 2/3/4/5 gimbals.
  • HDMI cable clamp. Protects the port and stabilizes external monitor connections.
  • ~174 g. Aluminum, stainless steel, wood, and silicone construction.

L-Shaped Mount Plate with Wooden Handle for Sigma FP2 (ID 6506)

SmallRig NATO rail and wooden grip detail

  • Integrated wooden grip. Reduces hand fatigue during street photography, travel, and long handheld sessions.
  • Anti-twist fit. 1/4"-20 screw with locating block for a secure, scratch-free mount.
  • Optical viewfinder compatible. Dedicated threaded hole on the back supports Sigma's original optical finder.
  • Arca-Swiss bottom. Fast transitions between handheld and tripod.
  • Built-in magnetic wrench. Tool-free installation on the go.

On-Site Feedback

The accessories drew steady attention throughout the hands-on session. Testers were consistently struck by the wooden grip — "more comfortable than the bare body" was a recurring note — and video shooters praised the Arca base's seamless handheld-to-tripod-to-gimbal transitions and the HDMI clamp. Japanese tech outlet ASCII went so far as to describe both accessories as likely to sell out.

Attendees at the Sigma FP2 launch event

"The best mounting accessory is the one that disappears into your workflow. The FP2 invites expansion — our cage and L-plate are built to answer that invitation without adding bulk you don't need." — The SmallRig Team

Pre-Order Now

The Sigma FP2 goes on sale November 11, 2026. Both SmallRig accessories are available for pre-order now.

Shop Cage for Sigma FP2 (6505) Shop L-Plate for Sigma FP2 (6506)

Product specifications and availability are subject to change without notice. Check each product page for the latest compatibility details.

Keep Reading
SmallRig-blog-image Unlock Multi-Camera Movement
SmallRig-blog-image SmallRig Video Contest Winners Announced
SmallRig-blog-image Your Go-Anywhere Studio: Build a Mobile Photography Setup with SmallRig