1.This is the OLD VERSION cage CVB2254, and please buy the corresponding OLD VERSION 2245 or 2246 if you need a SSD holder or a cable clamp for a perfect match.
2.If you need the OLD VERSION products, we have them in stock in SmallRig Amazon and Ebay stores.
3.When the cage is used with BMPCC 6K, SmallRig Lens Mount Adapter Support 2247 is NOT applicable.
SmallRig Half Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K (Old Version) CVB2254
1.A dedicated half cage for BMPCC 4K and 6K
2.Multiple mounting points (NATO railS, 1/4’’-20 and 3/8’’-16 threaded holes, ARRI locating holes and cold shoe) for accessories
3.Form-fitting design with unobstructed camera grip, button, port and battery access.
4.Securely locked by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles
5.Compatible with SmallRig Mount for Samsung T5 SSD, HDMI & SSD Cable Clamp, Metabones Adapter Support and other accessories
SmallRig Half Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K (Old Version) CVB2254 is a form-fitting cage. It is securely locked to the camera by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles and scratches. On the top and left side are built-in NATO rails, where you can attach SmallRig NATO Top Handle 1955 and SmallRig Wooden NATO Side Handle 2187 to conduct hand-held shooting. Multiple mounting points such as 1/4’’-20 & 3/8’’-16 threaded holes, cold shoe and ARRI locating holes are perfect for attaching accessories. For users who record with SmallRig Samsung T5 SSD Mount 2245 is a good choice. The cage is compatible with SmallRig HDMI & USB-C Cable Clamp 2246 to fix the cables. It works with SmallRig Lens Mount Adapter Support 2247 to keep your lens stable.
Designer: Yetta White
Blackmagic Design Pocket Cinema Camera 4K
Blackmagic Design Pocket Cinema Camera 6K
1 x Cage
3 x 1/4 Screw
1 x Hex Spanner
1 x Plate with Locating Pins
Product Dimensions: 136 x 75 x 115mm
Package Dimensions: 165 x 155 x 85mm
Net Weight: 228g
Package Weight: 316g
Material(s): Aluminum Alloy
*Please note the import tax may occur.
I bought the half cage rather than full as I was worried about clearance and balance issues on Ronin S. Ive mounted a couple cold shoes for my wireless mics. I think the cage gives the camera a little more protection and doesn't add much weight.
Fitted perfectly on my X- T2..... Not sure about the wooden extended grip but this can be removed. Joy of joys though, I can now access the ports on the left so that I can use my cable release...the vertical bracket being extendable. The magnetic key chuck a great idea...not sure how long it'll stay on the bottom...but have now kept in my camera bag. All in all a great little rig if just a little expensive hence the 4 stars
Loving this half cage. I can now attach the bmpcc 4K to my Moza AirCross 2 and air 2.
I went with the half cage on purpose as I thought the full cage made it a little annoying to get to the buttons on the right side. This is all I needed and it works as it should. small rig has been a great affordable quality option for cages etc.
This is a great addition to the XT3. If you¡¯re not using the battery pack then this gives you a little extra grip on the camera. Beautifully made, beautifully machined and of course it fits perfectly into an Arca Swiss quick release clamp. It is beautifully engineered and allows you easy access to both the battery and the ports on the left of the camera for simple tethered use with a computer. I would not use the X T3 without it.
What I like: It's dirt cheap when compared to 8Sinn, or Tilta, the two major players with the best cages I think. It's modular, to a point. You can add junk to this all day. I have the Samsung T5 SSD holder, a nato handle, and metabones mounts to this thing. They're all great. You can't make this a full cage, but oh well. I believe the full cage is too big and bulky for most medium to small sized hands, with not enough mount points on the ride side to justify going with that. It's tight, and light. Lightweight, and fits exactly.
Works and fits great, I got the half cage for my B cam which sits on my gimbal. With the cage there¡¯s no need for an adapter plate to shift the BMPCC4k. There are plenty of holes on the bottom to shift the camera laterally with room to spare for balancing. Stiff and sturdy like you¡¯d expect and it fits the camera like a glove.
I've used my Fugi XT 2 with this 'L' bracket fitted a few times now & am vert happy with it, the grip fits my hand well & the grip looks good to. I find the slid out side very useful to give me a bit extra thumb room to flip the tilt screen out & great to give cable access to the ports when shooting portrait. well thought out. my only slight doubt is in the magnet strength holding the screw driver, it seems ok but i can see me catching it on something unexpected & it will be gone, otherwise i love it.
I have not yet been able to build it up, but this is a start. I have the smallrig SSD mount, but I drilled out one of the holes so I can use a 1/4" screw and mount it in more places than with the smaller screws they give