SmallRig Cage for Nikon Z6/ Nikon Z7 Camera 2243
1. Form-Fitted aluminum cage for Nikon Z6 and Nikon Z7.
2. Anti-twist flanges to keep the camera from twisting.
3. Multiple 1/4"-20 & 3/8"-16 & Arri 3/8”threaded holes for accessory attachment.
4. Features a cold shoe on the top for microphone mount or light.
5. Nato rail on the left side allows to quick release accessory with nato clamp.
6. Features an m2.5 threaded hole on the left side as a second lock point to prevent the camera from twisting.
SmallRig Cage for Nikon Z6/ Nikon Z7 Camera 2243 is a form-fitted cage which is designed to provide all-around protection and mounting options for Nikon Z6 and Z7. The cage is fixed on the camera via the bottom 1/4"-20 threaded hole and features an m2.5 threaded hole on the left side as a second lock point to prevent the camera from twisting. The one-piece aluminum cage features multiple 1/4”-20, 3/8”-16 and Arri 3/8” threaded holes for accessories attachment. Additionally, it features a cold shoe on the top for microphone mount and a nato rail on the left allowing you to quickly release your setup. The bottom features multiple 1/4”-20 and one 3/8”-16 threaded holes allowing you to mount tripod plates. The cage features two M4 threaded holes which are used to mount FTZ Lens Adapter Mount 2244 to protect the lens mount. Optional Arca Baseplate 2092 could be attached to the bottom for the 15mm LWS system, as well as the cable clamp 1679 to protect the HDMI port.
Note: Please take off the strap ring on the left of the camera to install the cage.
Designer: Tracy Joy
Nikon Z6/ Nikon Z7
1 x Cage
1 x Allen Wrench
Product Dimensions: 151 x 111 x 65mm
Net Weight: 226g
Material(s): Aluminum Alloy
*Please note the import tax may occur.
I've been using it now for a few months and found it great for quality of build and use with camera except for one minor but almost major point.
I have found that you have to remember to fold out the camera's screen if you plan to use it before mounting it in the cage as it is almost impossible to get a grip of the bottom of the screen to fold it out once mounted in the cage. The bottom of the cage blocks the bottom grip tabs on the screen lower corners. If I forget, I have to use the flat blade of a screwdriver to lever it open.
Excellent cage and the extra screw for the camera strap eyelet eliminates camera twist. I would suggest buying some Thread adapter w/ 1/4" to 3/8" thread so you can use all the anchor holes on the cage for 1/4" mounts and the cold shoe plates. I use it with the FTZ adapter and mounting plate making it a very solid unit. Better than the cage for my Sony A7 Rii where I do get some camera twist.
Fits perfect, finish is very refined